User manual

Chapter 5: Management with WebPAM PRO
121
Figure 7. VTrak drive carrier LEDs
Creating a Disk Array
WebPAM PRO provides three methods of creating a disk array:
• Automatic – Creates a default disk array and logical drive based on
unconfigured physical drives in the system. No user choices. See “Creating
a Disk Array – Automatic Configuration” on page 122.
• Express – You choose the RAID characteristics and type of application.
Creates a disk array and logical drive(s) based on your input. See “Creating
a Disk Array – Express Configuration” on page 123.
• Advanced – You specify all parameters for a new disk array. One logical
drive will be made automatically when you create the disk array. If you
specify less than the total available capacity, you can use the remaining
space to create additional logical drives now or at a later time. See “Creating
a Disk Array – Advanced Configuration” on page 125.
Disk Status
Power/Activity