User manual

SuperTrak TX Series User Manual
118
Figure 6. VTrak drive carrier LEDs
Viewing Physical Drive Information
To view physical drive information:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.
4. Click the Physical Drives icon.
5. Click a Physical Drive icon.
Useful information provided here includes:
• Operational Status – OK is normal.
• Configuration Status – The array to which the drive is assigned or its spare
designation, including Unconfigured, Stale, Global Spare, Dedicated Spare.
Making Physical Drive Settings
The physical drive setting is the drive’s configuration.
To make physical drive settings:
1. Click the Subsystem icon in Tree View.
2. Click the Enclosures icon.
3. Click the Enclosure icon.
4. Click the Physical Drives icon.
Warning
When you change a physical drive’s configuration, you will lose all
data on the drive.
If the physical drive belonged to a disk array, you will lose the disk
array, logical drives, and all data they contained.
Be sure to backup any important data before you change drive
configuration!
Disk Status
Power/Activity