User manual

Chapter 5: Management with WebPAM PRO
115
Uncheck the box to disable the buzzer.
6. Click the Submit button
The changes take effect immediately.
Testing the Buzzer
You must enable the buzzer before you can test it. See “Making Buzzer
Settings,” above.
To test the buzzer:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Buzzer tab in Management View.
5. Click the Sound button.
The buzzer sounds a continuous tone.
6. Click the Mute button.
The buzzer goes silent but remains enabled.
Viewing Buzzer Information
This function refers to the buzzer on the SuperTrak RAID controller card.
To view buzzer information:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Buzzer tab in Management View.