User manual

SuperTrak TX Series User Manual
114
Making Controller Settings
To make Controller settings:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Settings tab in Management View.
5. Make the following settings as needed:
• Check the SMART Log box to enable the Self-Monitoring, Analysis, and
Reporting System (SMART).
• Enter a polling interval (1 to 1092 minutes) in SMART Polling Interval
field.
• Enter a time interval (15 to 255 seconds) in the Enclosure Polling
Interval field.
Note: Adaptive Writeback Cache and Forced Read Ahead Cache are
planned features for SuperTrak.
6. Click the Submit button.
The changes take effect immediately.
Silencing the Buzzer
To silence the buzzer for the current event:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Buzzer tab in Management View.
5. Click the Mute button.
The buzzer goes silent but will sound again for future events.
Making Buzzer Settings
To make buzzer settings:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. From the dropdown menu on the Buzzer tab, choose Settings.
5. Check the Enable Buzzer box to enable the buzzer.