User manual

Chapter 5: Management with WebPAM PRO
167
7. Click the OK button.
The chosen logical disappears from the Logical Drive List the Information
tab.
Migrating a Disk Array
On SuperTrak, RAID level migration is performed on the disk array but it applies
to the logical drives. The action of migrating a disk array means either or both:
• Change its RAID Level
• Increase the number of disk drives (sometimes called expansion)
For a list of Migration options and other important information, see “RAID Level
Migration” on page 248.
To Migrate an existing disk array:
1. Click the Subsystem icon in Tree View.
2. Click the Disk Arrays icon.
3. Click the Disk Array icon.
4. From the dropdown menu on the Background Activities tab, choose Start
Migration.
5. Highlight physical drives you want in the disk array from the Available list
and press the >> button to move them to the Selected list. You can also
double-click them to move them.
The added drives must be the same media type, HDD or SDD, as the other
physical drives in the disk array.
6. When you are done, click the Next button.
7. Choose a new RAID Level, if desired.
Note: If the source array is RAID 10 and you want the target array to be
RAID 10, you must specify RAID 10 under RAID level.
8. To expand the capacity of one or more logical drives, check the Expand
Capacity box.
9. If you checked the Expand Capacity box, enter a number into the Capacity
field and choose the appropriate unit of measure (MB, GB, TB).
10. Under Capacity Usage, highlight the logical drive whose RAID level you want
to change or whose capacity you want to expand.
11. Click the Update button.
The logical drive changes to reflect your choices.
12. Update other logical drives using the same method.
13. When you are done making changes, click the Next button.