User manual

SuperTrak EX Series User Manual
146
reserve capacity drops significantly, or the battery remains discharged, replace
the battery. Also see “Viewing Enclosure Information” on page 148.
Silencing the Buzzer
To silence the buzzer for the current event:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Buzzer tab in Management View.
5. Click the Mute button.
The buzzer goes silent but will sound again for future events.
Making Buzzer Settings
To make buzzer settings:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. From the dropdown menu on the Buzzer tab, choose Settings.
5. Check the Enable Buzzer box to enable the buzzer.
Uncheck the box to disable the buzzer.
6. Click the Submit button
The changes take effect immediately.
Testing the Buzzer
You must enable the buzzer before you can test it. See “Making Buzzer
Settings,” above.
To test the buzzer:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Buzzer tab in Management View.
5. Click the Sound button.
The buzzer sounds a continuous tone.
6. Click the Mute button.