User manual

SuperTrak EX Series User Manual
144
• Write Back Cache Flush Interval*
• Write Through Mode
• Enclosure Polling interval*
• Adaptive Writeback Cache*
Items marked with an asterisk (*) are user adjustable. See “Making
Controller Settings” on page 144.
Viewing Controller Statistics
To view controller statistics:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. From the dropdown menu on the Information tab, choose Statistics.
Making Controller Settings
To make Controller settings:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Settings tab in Management View.
5. Make the following settings as needed:
• Optional. Enter a name into the Alias field.
Maximum of 48 characters. Use letters, numbers, one space between
words, and underscore. An alias is not required.
•Check the SMART Log box to enable the Self-Monitoring, Analysis, and
Reporting System (SMART).
• Enter a polling interval (1 to 1440 minutes) in SMART Polling Interval
field.
•Check the Coercion Enabled box to enable disk drive capacity coercion.
• Choose a coercion method from the Coercion Method dropdown menu.
The choices are:
•GBTruncate
• 10GBTruncate
• GRPRounding
• TableRounding