User manual

SuperTrak EX Series User Manual
124
7. In the confirmation box, type the word confirm in the field provided.
8. Click the OK button.
Setting User Privilege
To set user privilege:
1. Click the Administrative Tools icon in Tree View.
2. Click the Subsystem/Host Management icon.
3. Click the IP address link of the Subsystem or Host you want to access.
4. Beside the name of the user whose privilege you want to change, choose
the privilege level from the Privilege dropdown menu.
For definitions of each privilege level, see “List of User Privileges” on
page 120.
5. Click the Submit button.
You can also set user privilege under User settings. See “Making User Settings”
on page 118.
Updating the Firmware on Multiple Systems
Use this function to update the firmware and BIOS on SuperTrak controllers in
multiple Host PCs at the same time.
You must first download the update file and save it to the Host PC. See
“Downloading BIOS and Firmware File” on page 289.
Note that this function does not update the software driver. Install the software
driver file following the procedure for your operating system. See “Chapter 3:
Installing Drivers” on page 63.
You can also update the firmware on:
• An individual SuperTrak controller
• A VTrak JBOD enclosure
See “Updating the Firmware” on page 132.
To update the SuperTrak firmware on multiple Host PCs:
1. Click the Administrative Tools icon in Tree View.
2. Click the Subsystem/Host Management icon.
Cautions
• Before you begin, backup any important or useful data.
• Do NOT power off your PC during the procedure.