Product manual

Chapter 6: PASM
77
1. In the Tree, click on the + beside the File & Print icon.
2. Click on the Sharing Setup icon.
3. Click on the Windows Sharing tab.
4. From the Volume dropdown menu, select the RAID Volume containing the
folder you want to modify.
5. From the Folder Name dropdown menu, select the folder you want to modify.
6. In the User/Group list, highlight the user or group to which you want to
assign permissions.
7. In the Permission list, click on the option button for one of the following
permissions:
• Deny Access
• Read Only
• Read and Write
8. Click the OK button.
Be sure the Windows service is running for this folder. See “Setting up
Windows Access” on page 71.
Setting up UNIX and Linux Sharing for a Folder
UNIX and Linux sharing designates which UNIX and Linux PCs can access the
folders on your SmartStor. You specify a UNIX or Linux PC by its IP address.
You can add up to 256 IP addresses for all of your folders.
You must designate the IP addresses for each folder individually.
To set up UNIX and Linux sharing for a folder:
1. In the Tree, click on the + beside the File & Print icon.
2. Click on the Sharing Setup icon in the tree.
3. Click on the UNIX/Linux Sharing tab.
4. From the Volume dropdown menu, select the RAID Volume containing the
folder you want to modify.
5. From the Folder Name dropdown menu, select the folder you want to modify.
6. In the New IP Address field, type the IIP address of the UNIX or Linux PC
from which you will access this folder.
7. Click the Add button.
Be sure the UNIX/Linux service is running for this folder. See “Setting up
UNIX/Linux Access” on page 72.