Product manual

Chapter 6: PASM
73
12. Click the OK button to save your settings.
13. In the Tree, click on the + beside the Sharing Setup icon.
14. Click on the UNIX/Linux Sharing tab.
15. Select a folder from the Folder Name dropdown menu.
16. In the New IP Address field, type the IP address of the UNIX or Linux PC
from which you will access this folder, then click the Add button.
You must designate the IP addresses for each folder individually. You can
have up to 256 IP addresses for all of your folders.
17. Click the OK button to save your settings.
You can now access the folder you selected from a UNIX or Linux PC.
See “Chapter 3: Connecting to the SmartStor” on page 21 for information
about the settings that you must make on your PC.
Setting up for Macintosh Access
Follow this procedure to set up access from a Macintosh PC:
1. In the Tree, click on the + beside the File & Print icon.
2. Click on the Protocol Control icon.
3. Click on the Macintosh tab.
4. Click the Enable option button beside Services.
5. Click the OK button to save your settings.
6. In the Tree, click on the + beside the File Sharing icon.
7. Click on the Modify tab.
8. From the Folder name dropdown menu, choose the folder you want to
access.
9. Check the Macintosh box.
10. Click the OK button to save your settings.
You can now access the specified folder from a Macintosh PC.
See “Chapter 3: Connecting to the SmartStor” on page 21 for information
about the settings that you must make on your PC.
Setting up for FTP Access
Follow this procedure to set up FTP access for your folders:
1. In the Tree, click on the + beside the File & Print icon.
2. Click on the Protocol Control icon.
3. Click on the FTP Sharing tab.
4. Click the Enable option button beside Services.