Product manual

SmartStor NS4300N Product Manual
52
Changing the SmartStor’s Network Settings
To change the SmartStor’s network settings:
1. Open the SmartSYNC window.
2. Click on the Server Information tab.
3. Click on the Assign IP button (right).
The Assign IP login dialog box appears.
4. Type the user name and password in the respective fields, then
click OK.
The default user name is admin. The default password is admin.
The user name and password are case sensitive.
The New IP Address dialog box appears.
5. Type the following into the fields provided:
• Computer Name – The SmartStor’s Server Name in SmartSYNC
• IP address
• Subnet Mask
• Default Gateway
• Primary DNS
• Secondary DNS.
6. Click OK to save your settings.
The changes appear in the Server List on the Server Information tab.
The change of IP address will disconnect the SmartStor as a network drive
under My Computer on your Windows PC
To access your data on the SmartStor, you must create a new network drive
in Windows. See “Connecting a Network Drive” on page 53.
Note
See your Network Administrator for help in making these settings.
Assign IP
button