Product manual

SmartStor NS4300N Product Manual
142
Rebooting the SmartStor
To reboot the SmartStor after a firmware upgrade:
1. In the Tree, click on the + beside the System icon.
2. Click on the Reboot / Shutdown icon.
3. Click on the Reboot option.
4. Click the OK button.
5. In the confirmation box, click the OK button.
The reboot runs automatically. When the SmartStor is
fully booted:
• The System Status LED turns green (right)
• The buzzer beeps one time (if the buzzer is
enabled)
Installing Application Plug-ins
Application plug-ins are enhancements to SmartStor’s capabilities. The DLNA
server, which enables SmartStor to support the UPnP protocol, is one example of
an application plug-in.
Follow this procedure to install an application plug-in on your SmartStor.
Downloading the Plug-in File
To download the plug-in file:
1. Download the plug-in file you want from the Promise website onto your PC.
2. Copy the plug-in file from your PC to a folder on the SmartStor.
Installing the Plug-in File
1. Start the PASM interface.
2. In the Tree, click on the + beside the Management icon.
3. Click on the System Upgrade icon.
4. From the Volume dropdown menu, choose the Volume that has the folder
with the plug-in file.
5. From the Folder dropdown menu, choose the Folder that contains the
plug-in file.
6. In the File Name field, type the name of the plug-in file.
7. Click the OK button to begin the installation.
System
Status
LED