Product manual

SmartStor NS4300N Product Manual
116
Checking Enclosure Status in PASM
To check Enclosure status:
1. Start PASM.
See “PASM in your Browser” on page 62.
Or see “PASM in SmartSYNC” on page 63.
2. In the Tree, click on the + beside the System icon.
3. Click on the System Information icon.
4. Click on the Enclosure Information tab.
See Figure 5.
Migration or Rebuilding
on array X paused at Y%.
RAID Volume Migration or Rebuild was paused
temporarily by user action.
Migration or Rebuilding
on array X resumed at
Y%.
RAID Volume Migration or Rebuild was paused and
then resumed by user action.
Migration or Rebuilding
on array X completed.
RAID Volume Migration or Rebuild has finished.
Normal.
Migration or Rebuilding
on array X aborted at Y%
RAID Volume Migration or Rebuild was aborted
(stopped) by user action.
Migration or Rebuilding
on array X aborted at Y%
because of error.
RAID Volume Migration or Rebuild has aborted
(stopped) because of an error. Check the disk drives.
See page 108. Check the RAID Volume. See
page 109.
RAID status: "OFFLINE".
The NS4300N X volume
Y is offline.
Check the disk drives. See page 108. Replace the
failed drive. See page 109. Create a new RAID
Volume. See page 80.
RAID status: "CRITICAL".
The NS4300N X volume
Y is not functioning
correctly.
Check the disk drives. See page 108. Replace the
failed drive. See page 109. The RAID Volume will
rebuild automatically.
RAID X had some errors.
Formatting was aborted!
Check the disk drives. See page 108. Replace the
failed drive. See page 109.
Reported Event Corrective Action