Product manual

SmartStor NS4300N Product Manual
112
To view File System status:
1. Start PASM.
See “PASM in your Browser” on page 62.
Or see “PASM in SmartSYNC” on page 63.
2. In the Tree, click on the + beside the RAID & File System icon.
3. Click on the File System Management icon.
4. Look for the RAID Volume icon on the File System Status tab.
If the RAID Volume icon is Critical (has a yellow !), the file system
contains errors and you must rebuild the file system. See below.
Rebuilding the File System
To rebuild a File System:
1. In the Tree, click on the + beside the RAID & File System icon.
2. Click on the File System Management icon.
3. In the File System Status tab, click on the RAID Volume Critical icon to
display the Rebuild File System button.
4. Click on the Rebuild File System button.
5. In the confirmation box, type yes into the field provided, then click the OK
button.
Checking the Event Log in PASM
To view the Event Log in PASM:
To check Enclosure status:
1. Start PASM.
See “PASM in your Browser” on page 62.
Or see “PASM in SmartSYNC” on page 63.
2. In the Tree, click on the + beside the Management icon.
3. Click on the Event Log icon.
The Event Log displays. See Figure 4.
Caution
When you rebuild a File System, you delete all the folders in the
RAID volume and all the data saved in the folders.