Product manual

SmartStor NS4300N Product Manual
94
• Time interval by hour – Set an hourly interval for a synchronization to
happen.
• Daily – Sets the time of day when the synchronization happens.
• Weekly – Sets the time of day and day of the week when the
synchronization happens.
9. Click the OK button.
Viewing the Results of NTP Synchronization
To view the results of an NTP synchronization:
1. In the Tree, click on the + beside the System icon.
2. Click on the Date / Time icon.
3. Click on the NTP tab.
The results of the latest synchronization are displayed:
• Last Synchronization Time – Time and date of the last synchronization
• Last Synchronization Result – OK means success
Rebooting the SmartStor
Normally you will only need to reboot the SmartStor is after a firmware upgrade.
See “Upgrading the Firmware” on page 141.
During the reboot, none of your folders will be accessible from your networked
PCs.
To reboot the SmartStor:
1. In the Tree, click on the + beside the System icon.
2. Click on the Reboot / Shutdown icon.
3. Click on the Reboot option.
4. Click the OK button.
5. In the confirmation box, click the OK button.
The reboot runs automatically. When the SmartStor is
fully booted:
• The System Status LED turns green (right)
• The buzzer beeps one time (if the buzzer is
enabled)
See “Enabling and Disabling the Buzzer” on page 91.
System
Status
LED