User's Manual

Chapter 6: PASM
91
Making Management Settings
This category includes the following topics:
• Viewing Service Status (page 91)
• Viewing the Event Log (page 92)
• Setting up SMTP Authentication (page 92)
• Viewing the Email Alert List (page 93)
• Adding an Email Alert Recipient (page 93)
• Deleting an Email Alert Recipient (page 93)
• Upgrading the System Firmware (page 93)
• Enabling and Disabling the Buzzer (page 94)
• Viewing UPS Status (page 94)
• Setting up a UPS (page 95)
Viewing Service Status
The SmartStor runs services to enable PCs to access the folders on the
SmartStor and to work as a print server.
To view Service Status:
1. In the Tree, click the + beside the Management icon.
2. Click the Service Status icon.
The status of each service displays on the Information tab.
• ON – The service is running.
• OFF – The service is not running.
3. If the service you want is OFF, click the Enable button to the right of the
Service.
Also see:
“Setting up Windows Access” on page 70
“Setting up UNIX/Linux Access” on page 71
“Setting up for Macintosh Access” on page 72
“Setting up for FTP Access” on page 73
“Setting up your Print Server” on page 74
“Setting up your DLNA Server” on page 74
“Setting up your DDNS Service” on page 90