User manual

SATA300 TX4302 User Manual
22
Disk Drive Information
The + icon to the left of a Port number indicates that a disk drive is installed on
that Port (below). On SATA300 TX4302, Ports 1 and 2 are external, Ports 3 and
4 are internal.
To view information about a disk drive:
1. Click on a + icon in the left panel.
2. Click on the disk drive icon below the Port number.
The information displays in the right panel. Disk drive information includes:
• Model Name
• Serial Number
•Firmware Version
• Geometry – Cylinder / Head / Sector. Blocks addressed by location
• Capacity – Number of Logical Block Addresses and capacity in GB
• Transfer Mode – In terms of Ultra DMA equivalent
• SMART Status – Self-Monitoring, Analysis and Reporting System.
Functional means there are no problems reported
This information may be useful for diagnostic purposes.