User manual

19
Chapter 5: PDCM
• Install PDCM, below
• Launch PDCM (page 20)
• PDCM Functions (page 21)
Promise Disk Controller Management (PDCM) is a Windows utility application
that monitors Promise non-RAID controllers, such as the SATA300 TX4302, and
the disk drives attached to them.
PDCM provides performance and diagnostic information, as well as TCQ/NCQ
settings on the disk drives.
Install PDCM
Follow these steps to install PDCM on your Windows-based PC or Server.
1. Boot up the PC/server and launch Windows.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. Double-click on the Install CD’s icon to open it.
4. Double-click on the Installer icon to launch it (right).
The first WebPAM installation dialog box appears.
5. Follow the prompts in the installation dialog box.