User manual

Chapter 3: Install Drivers

Existing Installation

After installing the SATA300 TX4302 Serial ATA Controller card and rebooting

your system, Windows XP setup will show a “Found New Hardware” dialog box.

1. Insert the driver diskette into the A:\ drive.

2. Choose Install the software automatically and press the Enter key.

3. Choose Windows Promise SATA300 TX4302 (tm) Controller from the list

that appears on screen, and then press the Enter key.

4. If using a driver that has not been digitally signed by Microsoft, you will be

asked if you want to continue the installation. Click Continue anyway.

5. When the New Hardware Wizard has finished installing the SATA300

TX4302 driver, click Finish.

Confirm Installation

1. Right-click on the My Computer icon and select Manage from the popup

menu.

2. From the left panel, select Device Manager.

3. Click the “+” in front of SCSI and RAID controllers. “Windows Promise

SATA300 TX4302 (tm) Controller” should appear.