User manual

SATA300 TX4302 User Manual
8
Or, attach individual LED cables as indicated in the diagram below.
6. Optional. If you have a Promise SuperSwap enclosure in your system,
attach the SMBus cable to the SMBus connectors on the SATA300 TX4302
card and the SuperSwap enclosure.
This action is described in Chapter 2 of the SuperSwap User Manual.
7. Replace the cover of your system.
LED1
LED2
LED3
LED4
– +
LED pinouts for
SATA300 TX4302
+ – – +
All LEDs