User manual

Chapter 2: Installation

• Unpack Your SATAII150 or SATA300 Card, below

• Install the SATAII150 or SATA300 Card (page 6)

• Install the Disk Drives: SATAII150 TX2plus or SATA300 TX2plus (page 7)

• Install the Disk Drives: SATAII150 TX4 (page 9)

• Install the Disk Drives: SATA300 TX4 (page 11)

This section is designed to quickly get your SATAII150 or SATA300 TX Series

Serial ATA Controller card up and running.

Unpack Your SATAII150 or SATA300 Card

When you receive the SATAII150 or SATA300 TX2plus card, the package should

contain the items listed below:

• SATAII150 or SATA300 TX2plus Serial ATA Controller card

• Quick Start Guide

• Two 0.65 m (26 inch) Serial ATA data cables. 1.5 Gb cables for SATAII150,

3.0 Gb cables for SATA300

• One 80-wire 40-pin ATA cable

• CD with drivers and SATAII150 and SATA300 TX Series User Manual

When you receive the SATAII150 or SATA300 TX4 card, the package should

contain the items listed below:

• SATAII150 or SATA300 TX4 Serial ATA Controller card

• Quick Start Guide

• Four 0.65 m (26 inch) Serial ATA data cables. 1.5 Gb cables for SATAII150,

3.0 Gb cables for SATA300

• CD with drivers and SATAII150 and SATA300 TX Series Manual

If ANY of the contents are missing or appear to be damaged, please contact your

dealer or distributor immediately.

Warning

Before installing the adapter into an existing system, backup any

important or useful data. Failure to follow this accepted PC

practice could result in data loss.