User manual

SATAII150 and SATA300 TX Series User Manual

Existing Installation

After installing the SATAII150 or SATA300 Serial ATA Controller card and

rebooting your system, Windows XP setup will show a “Found New Hardware”

dialog box.

1. Insert the driver diskette into the A:\ drive.

2. Choose Install the software automatically and press the Enter key.

3. Choose Windows Promise SATAII150/SATA300TX2plus [or TX4] (tm) IDE

Controller from the list that appears on screen, and then press the Enter

key.

4. If using a driver that has not been digitally signed by Microsoft, you will be

asked if you want to continue the installation. Click Continue anyway.

5. When the New Hardware Wizard has finished installing the SATAII150 or

SATA300 driver, click Finish.

Confirm Installation

1. Right-click on the My Computer icon and select Manage from the popup

menu.

2. From the left panel, select Device Manager.

3. Click the “+” in front of SCSI and RAID controllers. “Windows Promise

SATAII150/SATA300TX2plus [or TX4] (tm) IDE Controller” should appear.