User manual

21
Promise Technologies Pegasus J4User Manual
Auto shutDown powering sAving FeAture
eJ4AutoShutdownfeatureisusedtoshutothedeviceaeritsitsidlefor15minutes.
To enable this feature, do the following:
1. Launch the Pegasus J4 Firmware Updater application.
2. Click on the Settings icon at the top of the J4 Updater interface
3. Click to place a check mark in the Auto Shutdown option box.
4. Click on the Submit button.
Firmware Update menu
Utility Settings menu
Updating firmware
Use the Promise J4 Firmware Updater application to update system rmware. If you have not yet installed
the application, see “InstallingtheJ4FirmwareUpdater”onpage13.
You will need the latest rmware le. Please go to the PROMISE website at: www.promise.com click
on Support then Download Center, use the pull-down menu to locate the Pegasus J4, and click on the
Firmware link in the eld below to see what version is available. You can check your installed version listed
under Version Information in the J4 Updater main menu.
To update rmware on the J4, follow these steps:
1. Launch the Pegasus J4 Firmware Updater (open the Applications folder and double-click on the
Pegaus J4 FW Updater icon).
2. Click on the Firmware Update icon.
3. In the Firmware Update menu, click on the Choose File button, in the pop-up menu, locate the
downloaded rmware le on your system and click the Submit button. e chosen le appears listed
in the update menu.