User manual

11
Promise Technologies Pegasus J4User Manual
Power and Thunderbolt connections
Thunderbolt Cable
J4 Power Cable
Computer
Power Cable
Step 3.
Connect the other end of the
Thunderbolt cable to a Thunderbolt
equipped computer. Be sure the
connector is oriented properly for
the system it is being attached
to. The Thunderbolt port on the
computer might have a different
orientation than on the J4.
Step 3.
Connect the other end of the
Thunderbolt cable to a Thunderbolt
equipped computer. Be sure the
connector is oriented properly for
the system it is being attached
to. The Thunderbolt port on the
computer might have a different
orientation than on the J4.
Step 2.
Connect one end of the Thunderbolt
cable to either Thunderbolt port
on the rear panel of the J4. Note
that the Thunderbolt connector
housing should be oriented so that
the Thunderbolt symbol is facing
down when connecting it to the J4.
Step 2.
Connect one end of the Thunderbolt
cable to either Thunderbolt port
on the rear panel of the J4. Note
that the Thunderbolt connector
housing should be oriented so that
the Thunderbolt symbol is facing
down when connecting it to the J4.
Step 1.
Attach the power cord to the power
receptacle on the rear panel of
the J4. Plug the other end into a
suitable power source.
Step 1.
Attach the power cord to the power
receptacle on the rear panel of
the J4. Plug the other end into a
suitable power source.
✓