User manual
9
Promise Technologies Pegasus J4User Manual
insert storAge Drives
5. Place a new storage drive into an empty bay with the contact edge ready to receive the contacts in the
drive bay and oriented so the top side is facing up (the top has a label with specications and other
information about the drive). With the drive in position, push with your ngers on the edge opposite
the drive contacts until the drive is rmly seated in the drive bay.
6. Attach the anchor screw to secure the drive in place.
7. Repeat steps 5 and 6 for each remaining hard drive.
replAce housing cover
8. Replace the housing top into its proper positing.
9. Hold the unsecured housing in place and turn the J4 upside down once more.
10. Replace the screws and snug them tight. e J4 is now ready to be connected and powered on.
Insert storage drive
Top view of J4 with housing cover
drive anchor screw