Installation guide

✓
31
Promise Technologies
uPDaTe J2 firMWare in WinDoWs
Use WebPAM LITE to update device rmware on the J2 or to update the version of WebPAM LITE
installed on your computer.
To update J2 rmware or soware, rst check to see if the current versions are out of date. Click on
the Admin icon in WebPAM LITE, then click on the Device Update link. e menu will list the current
version of both the device rmware and WebPAM LITE soware.
Online Update
If the J2 rmware is out of date, the quickest method to update the J2 is to use the Online Update
feature. First click on the link Online Update then click on the lower Update button to install the
rmware ash le. Do not disconnect the J2 until you see a message conrming that the rmware has
been updated.
Local Update
You also have the option of updating rmware from a le you previously downloaded from the
PROMISE website. Do not disconnect the J2 until you see a message conrming that the rmware has
been updated. To perform a local update, rst go to the Download Center of the PROMISE website
to download the latest rmware and place the le on your computer. en click on the Local Update
link. Click on the Browse button and locate the downloaded le, then click the Next button to begin
the update process. Do not disconnect the J2 until you see a message conrming that the rmware has
been updated.