Installation guide
!
12
Pegasus J2 Windows Installation Guide
Step 2: connect the J2 to your WindoWS computer
With the driver and soware now installed, go ahead and make the underbolt connection.
Insert one end of a underbolt cable into the underbolt port on the J2 and connect the other end
of the cable to a underbolt port on your computer. Make sure the cable connector is oriented correctly
to the port on both the J2 and the computer. It should t easily in place when correctly positioned.
Once connected, proceed to “Step 3: Congure J2 for Windows” on page 14 for further instructions.
Thunderbolt Port
Pegasus J2 drive