User manual

WebPAM User Manual
78
Figure 104. Enclosure Window.
The Enclosure Window displays:
Enclosure Type
– Lists the model of
enclosure, in this case an UltraTrak RM4000.
Fan Speeds
– Each drive in the enclosure has
a cooling fan. Above 2,000 rpm is normal
speed. When a fan turns slowly or stops, it
requires attention.
OK Problem
Temperature – 30°C (86°F) is normal. Each
sensor displays a reading. If the temperature
climbs above 52°C (124°F), it may be due to a
broken fan or blocked cooling passages and
requires attention.
OK Problem
OK
Power Status – Shows the voltages of the 12-
and 5-volt circuits inside the enclosure. If these
voltages are above or below specification, there
may be a problem with the power supply.
Problem