User manual

Chapter 5: RAID Monitoring & Maintenance
69
Figure 87. Synchronization Schedule Screen.
2. In the Synchronization Schedule screen, specify the following:
• By the minute – Specify how many minutes
• By the hour – Specify how many hours
• By the day – Specify the hour of the day
• By the week – Specify the day of the week and hour of day
• By the month – Specify the day of the month and hour of day
• Disable Array Synchronization Schedule – No automatic
synchronization
When inputting the time of day, use 1 to 23 in the Hrs. field and 30
to 59 in the Min. field. To set noon, input 12 hr and 0 min. To set
6:30 pm, input 18 hr and 30 min.
3. When you are done, click the Submit button. The Array
Management screen appears again. Your changes take effect
immediately.
To restore the previous settings before you submit them, click the Reset
button.
To verify that automatic Synchronization is taking place, check the Event
Log.
If you select Disable Array Synchronization Schedule, you can still
synchronize the array manually. See Synchronize Array, earlier in this
chapter.