User manual

WebPAM User Manual
66
Figure 83. Expand Array Screen.
3. Select the available disk drives you want to add from the Free Disks
list. Click the >> button to move them to the Used Disks list.
4. Click the Submit button when you are done. The Array Management
function screen returns and the Array begins the expanding process.
Watch the Event Window for progress.
Convert Array
If you have an UltraTrak RAID, you have the option of converting your
Array. To convert an Array means to change the RAID Level of an
existing Array without losing any data.
You can also add disk drives to the Array during the Conversion
process.
You must have Creation Rights to perform this function.
See Appendix A of this manual for information on RAID Levels, the
required number of Disk Drives and RAID controller capabilities.
To convert an Array:
1. In Tree View, click the
icon of the Array you want to convert.