User manual

Chapter 5: RAID Monitoring & Maintenance
65
2. In the Management Window, click on Rebuild Array. The Rebuild
Array screen appears.
Figure 81. Rebuild Array Screen.
3. In the Disk Name dropdown menu, select the replacement disk drive
by its Channel number.
4. Click the Submit button when you are done. The Array Management
function screen returns and the Array begins rebuilding.
Watch the Event Frame for progress.
Expand Array
If you have an UltraTrak, you have the option of expanding your array.
To expand an Array means adding disk drives to an existing Array
without losing any data.
You must have Creation Rights to perform this function.
See Appendix A of this manual for information on RAID Levels, the
required number of Disk Drives and RAID controller capabilities.
To expand an Array:
1. In Tree View, click the
icon of the Array you want to expand.
Figure 82. Array Management Screen.
2. In the Management Window, click on Expand Array. The Expand
Array screen appears.