User manual

WebPAM User Manual
62
Notes
• The available RAID selection depends on which
Promise product you have and the number of disk
drives available.
• The default Block size is 64KB.
• Promise recommends checking Initialize Array.
5. Select the Free Disks you want to use and click the >> button or
double-click on the disks to move them to the Used Disks field.
6. Click the Submit button when you are finished. A popup message
appears indicating the array was created (below).
Figure 75. Array created message.
The Event Window will show the new Array. If you checked the Initialize
Array box, the Array Status will display the process of initialization.
Figure 76. The New Array in the Management Window.
7. After Array Status shows Functional:
• If you are running a SuperTrak, reboot your computer.
• If you are running an UltraTrak, no rebooting is necessary.
Your new RAID array must be partitioned and formatted by the RAID
PC’s operating system before use. Use the same method of partitioning
and formatting on an array as you would any other fixed disk.