User manual

WebPAM User Manual

Note: If your network has a DHCP server, Promise recommends that

you specify the Hostname, rather than the IP Address, when creating a

new Host (RAID PC). See Appendix B of this manual for more

information.

Regular Connection

• WebPAM uses an HTTP connection .......................http://

• Use either the IP Address .......................... 192.168.1.108

or Hostname ....................................................webserver1

• Indicate the Port number ...........................................:8080

• Add promise to launch WebPAM ......................../promise

Together, your entry looks like these:

http://192.168.1.108:8080/promise

http://webserver1:8080/promise

Note that when you are using an IP Address from an external

connection, such as over the Internet, you will use a different IP Address

than you would over the company’s LAN. See your MIS Administrator

for help in establishing external access. This requirement applies to

regular and secure connections.

Secure Connection

If you installed a security option (see Chapter 2), use a secure login.

• WebPAM uses a secure HTTP connection ........... https://

• Use either the IP Address .......................... 192.168.1.108

or Hostname ....................................................webserver1

• Indicate the Port number ...........................................:8443

• Add promise to launch WebPAM ......................../promise

Together, your entry looks like these:

https://192.168.1.108:8443/promise

https://webserver1:8443/promise

Note that the IP Address and Hostname shown above are only

examples. The IP Address and Hostname you type in will be different.

Using a Hostname

In order to use a Hostname rather than an IP address, your network

must have a Domain Name System (DNS) Server and the DNS Server