User manual

Appendix C: Troubleshooting
95
 Verify the SCSI Base Management setting:
1. On the UltraTrak LCD display, press SEL to activate the screen.
2. Press the down arrow to Configuration and press SEL.
3. Press the down arrow twice to Configure SCSI and press SEL.
4. Press the down arrow twice to SCSI Base Mgt.
SCSI ID
SCSI Base Mgt. Enabled
Figure 117. UltraTrak SCSI Configuration Menu.
5. SCSI Base Mgt should be Enabled. If not, press SEL to toggle
between Disabled and Enabled.
6. Press Exit to accept then press SEL to save.
7. Press SEL again to restart the UltraTrak.
 Verify that your SCSI host adapter card and driver are properly installed
on the RAID PC.
1. Right-click on My Computer and select Manage from the popup
menu.
2. Select the Device Manager.
3. Check under SCSI and RAID Controllers.
Figure 118. Windows Device Manager.