User guide

Appendix C Standby/Hibernation Lock
Installing Standby/Hibernation Lock prevents the system from entering the standby or
hibernation state.
In any environment using the EX4650 RAID system, the Standby/Hibernation Lock feature is
not supported. Be sure to install the Standby/Hibernation Lock as described in the following
procedure. Before uninstalling the Standby/Hibernation Lock, check whether the driver is used
by another software.
Installation
Install the Standby/Hibernation Lock in the following procedure.
1. Log on the system with an account having administrator authority (such as
administrator).
2. Before starting the installation, exit from all the applications currently executed.
3. For the Windows x64 Editions (64-bit OS) environment, start
"\WEBPAMPR\ACPIDV64\EXPLOCK.BAT" in the attached CD-ROM. For other
Windows environments, start "\WEBPAMPR\ACPIDV32\PAM_INST.BAT" in the
attached CD-ROM.
A dialog box indicating that the driver is not signed may appear on the way as shown
below. Select [Yes] if it appears.
The following message may appear on the command prompt. (In the 64-bit OS
environment, this will not be displayed.)
Driver Installed successfully.
The installation is completed.
- 85 -