User guide

Event
ID
Message Action
7684
Rebuild is stopped
The Rebuild is stopped. Restart rebuilding as soon as
possible.
7687
Rebuild is aborted due to an
internal error
The Rebuilding was aborted. Please contact your sales
representative.
7689
Rebuild is queued
7696
Auto rebuild can not start
The capacity of an unconfigured physical drive is not
suitable for rebuild. Replace with a drive of the proper
capacity.
7697
Rebuild stopped internally
Rebuilding aborted. Please contact the sales representative.
1542
Redundancy check is aborted
due to an internal error
Check the HDD and cables and replace it if any failure
exists.
1543
Redundancy check
encountered inconsistent
block(s)
If any error occurs in a HDD, replace that HDD.
If no error occurs in the HDDs, back up the system data
and replace all the HDDs.
1546
Redundancy check task is
stopped internally
Check the HDD and cables and replace it if any failure
exists.
The above table shows the event IDs in decimal. The events listed in the table are reported to
the NEC ESMPRO Manager. The symbols such as %1 in messages are padding characters.
- 84 -