User guide

The Progress bar is displayed.
NOTES:
 If you perform a redundancy check in the Auto Fix mode for the first
time with a logical drive not full-initialized after its creation , the
following message is registered.
Redundancy check is started on unsyncronized logical drive
(event ID:1547).
 Once the redundancy check is completed, be sure to see the event log to
check whether one or more errors occured during the redundancy check.
If a media error occurred, a message indicating the occurrence appears
before the message showing that the redundancy check is completed
without any problem.
 If a rebuild occurs for a logical drive at the time when a redundancy
check of the logical drive was scheduled, the redundancy check is
skipped.
 While a redundancy check is running on a logical drive, if another
scheduled redundancy check is to be run, the scheduled redundancy
check is skipped.
 If the power is off at the time when a redundancy check was previously
scheduled, the scheduled redundancy check is skipped.
3.8.1 Scheduling Redundancy Check
To schedule a routine redundancy check, follow the procedure below.
1. Click the subsystem (ST EX4650EL) icon in the Tree View.
2. Click the downward arrow at the right end of the Scheduler tab in the Management Window
and then click Add BGA Scheduler.
3. Set the following values and click [Next].
- 52 -