User guide

Write Policy Set write policy.
Write Through: Does not use cache in writing.
Write Back: Always uses cache in writing. This setting can improve
the writing performance.
However, in spite of the setting, the actual write cache state may
change depending on the write cache setting of the controller
(Adaptive Writeback Cache) and on the battery state.
Initialization Sets whether the logical drives are initialized just after they are
created.
None: Does not initialize logical drives (default).
Quick: Initializes master boot sectors only.
Full: Initializes all the logical drives.
In RAID0, only "None" or "Quick" is selectable.
4. Once the selections have been made, click [Update].
The logical drive is added and displayed graphically in Capacity Usage. If some capacity
remains in [Max:] of the Capacity field, click the Update button to add another logical drive.
The above configuration can be unique to each logical drive.
5. Once all the required logical drives have been added, click [Next].
The summary appears.
Advanced Configuration (Step 3 - Summary)
If no problems are found, click [Submit].
The disk arrays and logical drives are created.
- 48 -