User guide

3.6.2 Express Configuration
1. Click Disk Arrays in the Tree View.
2. Click the Create tab in the Management Window and select Express Configuration.
The following options can be set.
Redundancy Determines whether redundant logical drives are created or not.
If you check the checkbox, RAID1, RAID5 or RAID10 is created
depending on the number of connected HDDs available for creating
logical drives.
If you do not check the checkbox, RAID0 is created.
Note: If only one HDD available for creating logical drives is
connected, RAID0 is created no matter whether the checkbox is
checked or not.
Capacity If you check the checkbox, the maximum capacity available for the
creation is set.
Performance If you check the checkbox, the maximum read/write performance is
set.
Number of Logical
Drives
Enter the number of logical drives to be created.
- 44 -