User guide

Operation Status OK The disk array operates normally.

Degraded One of the members of the disk array is in

abnormal status.

Offline The disk array is in offline status.

OK, Rebuilding The disk array is being rebuilt.

OK, PDM Running The disk array is under PDM.

OK, Transition Running The disk array is under Transition.

OK, Migration Running The disk array is under expansion.

Transport Ready The disk array is ready for transport.

Settings tab

The Settings tab allows you to enable or disable the alias, media patrol and PDM.

IMPORTANT: If an error occurred in any HDD in the

logical drive while the PDM feature is enabled, the data

is copied onto the spare drive automatically.

Consequently, the slot location initially assigned for a

physical drive configuring a logical drive may be

changed. Consideration must be taken into account to use

the PDM feature. See "3.11 PDM" for details.

Create LD tab

For the Create LD tab, see "3.6 Creating Disk Array and Logical Drive."

Delete LD tab

For the Delete LD tab, see "3.7 Deleing Disk Array and Logical Drive."

Background Activities tab

The Background Activities tab displays the BGA being run in the selected disk array. Clicking

the arrow at the right end of the tab allows the BGA start menu executable at the RAID level

(including expansion, rebuild, PDM and transition) to be displayed. See the section describing

each BGA for details.

Transport tab

For the Transport tab, see "3.13 Transport."

- 39 -