User guide

5. Select [Yes, I want to restart my computer now], and click [OK].
The system restarts, and the installation is complete.
IMPORTANT:
 An error regarding WebPAM PRO service may occur immediately after
installing WebPAM PRO. As described below, you have to restart the
system after WebPAM PRO installation. This error does not occur
anymore once the system has been restarted.
 To use WebPAM PRO with the Internet Explorer, some default settings
of Internet Explorer must be changed. Change the default settings
following the instructions in "Appendix A Preparation for Using
WebPAM PRO on Internet Explorer."
 After installing WebPAM PRO, always install the Standby/Hibernation
Lock following the instructions in the Appendix C. This RAID system
does not support power control features.
NOTE: To display event messages on the NEC ESMPRO
Manager or to use the express report service, some
settings may be required. Refer to Appendix B. For the
events list, see Appendix B.
- 12 -