User Manual

If you need to add physical drives to your array, be sure there are unassigned physical drives are
installed in your RAID system before you begin migration.
See “RAID Levels” on page 91, and “RAID Level Migration” on page 101 and “RAID Level
Migration”onpage84.
To migrate a logical drive:
1. Click on the Background Activities icon.
The list of background activities appears.
2. Mouse-over Migrate and click the Start button.
3. In the Select Disk Array dropdown menu, choose the source disk array.
4. In the Select Physical Drives diagram, click the drives to add them to your array.
TheIDnumbersofthechosendrivesappearintheeldbelowthediagram.
5. Click the Next button.
6. Check the box next to the logical drive you want to modify.
7. From the dropdown menu, choose a target RAID level.
The choice of RAID levels depends the number of physical drives in the disk array. See the Note
below.
8. In the Capacity eld,acceptthecurrentcapacity.
Or check the Expand Capacity box and enter a greater capacity and size in MB, GB or TB.
If there is capacity remaining, you can create an additional logical drive.
9. Click the Next button.
The logical drive ID numbers, with the original and target RAID levels and capacities are shown
10. Toaccepttheproposedtargetvalues,clicktheConrmbutton.
80
Pegasus2 R4/R6/R8 Product Manual