User Manual

4. Choose the initialization option you want:
• Quick Initialization –ChecktheboxandenteravalueintheQuickInitializationSizeeld.
This value is the size of the initialization blocks in MB.
• Full Initialization – Do not check the box. Enter a hexadecimal value in the Initialization
PatterninHexeldorusethedefault00000000value.
5. Click the Conrmbutton.
6. IntheConrmationbox,typetheword“conrm”intheeldprovidedandclicktheConrm
button.
PAuSing AnD reSuMing An initiAlizAtion
To pause or resume Initialization:
1. Click on the Background Activities icon.
The list of background activities appears.
2. Mouse-over Initialization and click the Pause or Resume button.
StoPPing An initiAlizAtion
To stop means to cancel an Initialization:
1. Click on the Background Activities icon.
The list of background activities appears.
2. Mouse-over Initialization and click the Stop button.
3. IntheConrmationbox,typetheword“conrm”intheeldprovidedandclicktheConrm
button.
redundAnCy CheCk on A logiCAl drive
Redundancy Check is a routine maintenance procedure for fault-tolerant disk arrays (those with
redundancy) that ensures all the data matches exactly. Redundancy Check can also correct
inconsistencies.
To run Redundancy Check on a logical drive:
1. Click on the Background Activities icon.
The list of background activities appears.
2. Mouse-over Redundancy Check and click the Start button.
3. Check the boxes to the left of the logical drives on which to run Redundancy Check.
78
Pegasus2 R4/R6/R8 Product Manual