User Manual

4. Click the Save button.
5. Click the X icon to close the settings panel.
mAking physiCAl drive smArt log settings
To make physical drive SMART log settings:
1. Click the Physical Drive icon.
2. Mouse-over the physical drive you want then click the Settings button.
3. Click the SMART Log Settings tab.
4. Check the box to enable the SMART log.
5. Click the Save button.
6. Click the X icon to close the settings panel.
CleAring A stAle or A pfA Condition
Stale – The physical drive contains obsolete disk array information.
PFA – The physical drive has errors resulting in a prediction of failure.
Besureyouhaverstcorrectedtheconditionbyaphysicaldrivereplacement,rebuildoperation,etc.
Then clear the condition.
To clear a Stale or a PFA condition:
1. Click the Physical Drive icon.
2. Mouse-over the physical drive you want then click the Clear button.
3. Click the Conrmbutton.
If the physical drive has both a Stale condition and aPFAcondition,therstclickremovestheStale
condition. Click the Clear button a second time to remove the PFA condition.
53
Promise Technologies