User Manual

mAking globAl physiCAl drive settings
To make global physical drive settings:
1. Click the Physical Drive icon..
2. Click the Global Physical Drive Settings button.
3. Check the boxes to enable, uncheck to disable.
• Enable Write Cache
• Enable Read Look Ahead Cache
• Enable Command Queuing
4. Click the Save button.
5. Click the X icon to close the settings panel.
mAking individuAl physiCAl drive settings
To make individual physical drive settings:
1. Do one of the following actions:
• Click the Physical Drive icon.
• From the Device menu, choose Physical Drive.
2. Mouse-over the physical drive you want then click the Settings button.
3. Make changes as needed:
• Enter,change,ordeletethealiasintheAliaseld.
• ChooseUnconguredorPassThruConguration.
Uncongureddrivesarenotvisibletoyourcomputer.Usethemtomakediskarrays.
PassThrudrivesarevisibletoyourcomputerandareconguredasindividualdrives.They
cannot be used to make a disk array.
52
Pegasus2 R4/R6/R8 Product Manual