User Manual

PAcking list

Check the shipping package to make sure you have the following items:

• Pegasus2 R4, Pegasus2 R6 or Pegasus2 R8

• Hard disk drives (four in R4, six in R6, eight in R8)

• Quick Start Guide

• Thunderboltcable

• Power cord

summAry of the setup proCedure

The setup procedure for the Pegasus2 is simple and easy. The device is shipped with hard disk drives

installedandaRAIDarraycongured,soitisjustnecessarytoplugitinandconnectthedevice.

However you should install the PROMISE Utility software used for monitoring and administration of the

system. Please follow the setup procedure here or in the Quick Start Guide.

Thesetupprocessissummarizedbelow.

1. Unpack the Pegasus2 shipping package

2. Connect the power cord and power on the Pegasus2 R4/R6/R8.

3. ConnectthePegasus2toyourMaccomputerwithaThunderboltcable.

4. Find the Pegasus2 Utility installation package located on the device (Pegasus2 is shipped with

RAID5conguration)andinstallthemanagementsoftwareutility.

Promise Technologies