User Manual

PhysicAl drive Problems
Physical drive troubleshooting includes:
• “Diagnosis using the PROMISE Utility”
• “Locating a Physical Drive”
• “Replacing a Physical Drive”
• “Physical Drive Warning Message”
Physical drives are the foundation of data storage. A physical drive problem can affect your entire RAID
system.
diAgnosis using the promise utility
In the PROMISE Utility, when a yellow ! icon or a red X icon appears beside a physical drive,
check the drive’s operational status:
1. Click the PhysicalDriveicon.
2. Mouse-over and click the physical drive you want then click the Viewbutton.
Look under Operational Status for the condition of the physical drive.
• Ofine– Check the drive for:
• PFACondition– Caused by a bad block or sector. See Note 1 below.
• StaleCondition– Caused by obsolete array information on the physical drive. See Note 2
below.
• DriveFailedorDead– The physical drive cannot be repaired. You must replace the failed
drive.
Note1:Clear the error condition. Then the physical drive is available. See “Clearing a Stale or a PFA
Condition” on page 53.
Note2:Identify the disk array to which the physical drive belongs. Then delete the disk array. If the
error condition remains on the physical drive, clear the error condition.
123
Promise Technologies