User Manual

MAKing reBuilD SettingS
1. Click on the Background Activities icon.
2. Click the Settings button.
3. Click the Rebuild Rate dropdown menu and choose a rate:
• Low – Fewer system resources to the Rebuild, more to data read/write operations.
• Medium – Balances system resources between the Rebuild and data read/write operations.
• High – More system resources to the Rebuild, fewer to data read/write operations.
4. Check the Enable Auto Rebuild box to enable Auto Rebuild (rebuilds when you swap out the
failed drive with a new one).
5. Click the Conrmbutton.
6. Click the X icon to close the background activities panel.
migrAtion
The term “Migration” means either or both of the following:
• Change the RAID level of a logical drive.
• Expand the storage capacity of a logical drive.
See “Migrating a Logical Drive” on page 79.
MAKing MigrAtion SettingS
To make migration settings:
1. Click on the Background Activities icon.
2. Click the Settings button.
3. Click the Migration Rate dropdown menu and choose a rate:
• Low – Fewer system resources to Migration, more to data read/write operations.
• Medium – Balances system resources between Migration and data read/write operations.
• High – More system resources to Migration, fewer to data read/write operations.
4. Click the Conrmbutton.
5. Click the X icon to close the background activities panel.
44
Pegasus2 R4/R6/R8 Product Manual