User`s guide

58 59
Specifications Line-up
Connectors
NSR-500
Key Features
VIDEO SECURITY
RECORDING SOLUTIONS
Front Panel (Cover Open) NSR-500
The NSR-500 is Sony’s 16-channel full-HD network surveillance
recording server delivering an excellent cost-performance ratio.
Six models with different storage capacities are available, so you
can select according to your precise requirements.
t Long-duration Recording
With a 12 TB HDD (2 TB x 6), you can record more than 300
hours of high-quality full-HD images compressed at 4 Mbps
with a frame rate of 30 fps.
t RAID Technology to Prevent Disk-failure Data Loss
The hard disk storage units of the NSR-500 are configured with
high redundancy. They feature RAID implementations and
hotswappable capabilities to protect important data against
hard disk failure, 24 hours a day. You can choose from RAID
1 (1+0), RAID 5 or RAID 5 + Hot Spare, depending on your
system requirements.
t Optional Licenses for Future System Expansion
The optional NSBK-CL05 allows you to add extra licenses,
and you can connect up to 24 network cameras to a single
NSR-500 (including the original 16 cameras).
t Easy Setup and Easy Operation
The NSR-500 detects Sony’s network cameras in a network and
sets up all the parameters of each camera in a step-by-step
manner with a dedicated setup wizard. This drastically reduces
the time required for system installation. Images from cameras
are assigned automatically to a monitor layout menu, so that
you can start monitoring instantly.
t Backward System Compatibility
The NSR-500 can be used with Sony’s existing recording
systems such as the NSR-1000 Series, and RealShot Manager
Advanced, through the RealShot Manager Advanced client,
whose software can be downloaded from the NSR-500.
Optional Accessories
t Additional Camera License NSBK-CL05
t Hard Disk Drive (1 TB) NSBK-HS05:01
t Hard Disk Drive (2 TB) NSBK-HS05:02
Configurations
Standalone Configuration Multi-location System
NSR-500
NSR-500
NSR-1000 Series
HDMI/RGB Monitor
Branch 1
Branch 2
Sony’s Network Cameras
Sony’s Network Cameras
Sony’s Network Cameras
Third-Party Network
Cameras
Third-Party Network
Cameras
Network Switch
Network Switch
Monitoring Room
(RSM Advanced installed)
Broadband Router
Client PC
(RSM Advanced installed)
Video/Recording
Number of cameras supported 16 (max. 24ch with NSBK-CL05)
Video compression (IP camera) H.264, MPEG-4, JPEG
Total recording frame rate
(at H.264, full-HD, 4 Mbps)
480 fps
Recording frame rate / camera Max. 30 fps / camera
Hard disk drives
(physical capacity)
Up to 12 TB (2 TB x 6)
Hard disk drives (interface) Serial ATA
Hard disk drives (RAID level)
*RAID level to be selected
depends on the number of HDDs
RAID 0, 1 (1+0), 5, 5+hot spare
Hard disk drives
(recording capacity)
NSR-500:01 (RAID no) : Approx. 880 GB
NSR-500:02 (RAID 0) : Approx. 1.7 TB
NSR-500:04 (RAID 5) : Approx. 2.6 TB
NSR-500:08 (RAID 5) : Approx. 5.4 TB
NSR-500:12 (RAID 5) : Approx. 9.0 TB
Expansion storage iSCSI storage (max. 16 TB)
Video Output
Monitor OUT *1 Analogue RGB (D-sub 15-pin) x 1
Monitor OUT display resolution
1,920 x 1,200 / 1,920 x 1,080 / 1,360 x 768 / 1,600 x 1,200 /
1,280 x 1,024 / 1,024 x 768
Audio Output
Audio OUT Stereo mini jack x 1
Sensor Input/Alarm Output
Sensor IN
Compatible with DC3.3 V to 24 V, photo coupler input x 8
(insulated from main unit)
Alarm OUT
Max. DC 24V/1A, mechanical relay output x 8
(insulated from main unit)
Other Interfaces
Ethernet 1000BASE-T/100BASE-TX/10BASE-T x 2
USB USB2.0 x 2 (Front), USB2.0 x 2 (Rear)
Serial interface (for UPS) RS-232C : D-sub 9-pin x 1
General
Dimensions (W x H x D)
440 x 88 x 400 mm (17 3/8 x 3 1/2 x 15 3/4 inch),
excluding protrusions
Mass Approx. 9.4 kg (20 lb 12 oz)
Power requirements 100 V to 127 V AC / 200 V to 240 V (50/60 Hz)
Power consumption Max. 250 W (100-240 V 3.5-1.5 A)
Operating temperature 5 to 40 degrees C (41 to 104 degrees F)
Operating humidity 20 to 80% (no condensing)
Supplied accessories
Installation manual x 1, CD-ROM x 1, Flyer (WEEE) x 1,
Flyer (EU battery) x 1, Warranty booklet x 1,
Front panel key x 2, Rubber PAD x 4, HDD screw x 24
(*w/o HDD model only), Setup Disc x 1 (*w/o HDD model only)
NSR-500 NSR-500:00 NSR-500:01 NSR-500:02 NSR-500:04 NSR-500:08 NSR-500:12
HDD - 1 TB x1 1 TB x2 1 TB x4 1 TB x4 1 TB x6
Physical
capacity
- 1 TB 2 TB 4 TB 8 TB 12 TB
Default
RAID level
- - RAID 0 RAID 5
*1: Monitoring performance depends on the number of cameras registered and recorded, so Display Out is
used for making settings.
Rear Panel NSR-500
Hybrid Camera Receivers
SNCA-ZX104 4CH Hybrid Camera Receiver.
Video/Recording SNCA-ZX104
Number of supported
hybrid cameras
4
Camera input BNC x 4
Analogue video output BNC x 4
Other Interfaces
Network port RJ45 x 1 (100Base-TX/10Base-T)
Serial interface RS-485 x 1
Supported Serial PTZ
control protocol
Pelco-D
General
Power requirements
DC 12 V (AC 100 V to AC 127 V, AC 200 V to
AC 240 V, 50/60 Hz for AC adaptor)
Power consumption
Approx. 8.5 W/9.0 W (AC 100 V/AC 240 V)
with AC adaptor
Dimensions (W x H x D)
210 x 44 x 250 mm (8 1/3 x 1 3/4 x 9 7/8 inches)
not including projecting parts