SuperTrak Quick Start Guide

Task 2: Installing the SuperTrak Card

The SuperTrak EX Controller card fits into any available 3.3-volt PCI-Express X8

slot. You can also plug the SuperTrak card into a PCI-Express X16 slot.

1. Remove the cover of your PC or enclosure.

2. Remove the inside slot cover of an available PCI-Express slot on the

motherboard.

3. Install the SuperTrak card into the open PCI-Express slot.

4. Fasten the SuperTrak card bracket to the PC or enclosure case.

5. Attach t to one of the SAS ports on the SuperTrak card.

See Figure 1.